
BAREFOOT SOUND MICROMAIN45 SPEAKER, 3-WAY ACTIVE STUDIO MONITOR, SG OFFICIAL SET
Barefoot Audio Proundly Introduced into Singapore Since 2021
BY ELEMENT5, OFFICAL SINGAPORE SETS
POWER, RESOLUTION, AND ACCURACY
MICROMAIN45
• 610 watts of power per monitor
• Frequency Response: 40Hz–45kHz
• MAX SPL: Continuous 113dB
• Sealed cabinet design
• 8″ Aluminum Cone Subwoofer
• Dual 2.5″ Aluminum Cone Midrange
• 1″ Ring Radiator Tweeter
• MEME™ Technology Voice Emulation
• Compact and affordable
• Dimensions 11.0″ H x 15.5″ W x 10.75″ D
THE STORY
One of Barefoot Sound’s focuses is meeting the needs of small to mid-sized project studios. By designing monitors that can replace several sets of speakers, Barefoot provides engineers with more space without compromising monitoring quality. The MicroMain45 3-way active monitor with MEME™ Technology continues the legacy of excellence established by its predecessors.
Featuring the same signal path, amplifier, and driver technologies as Barefoot Sound’s flagship MiniMain12, the MicroMain45 is streamlined to deliver Barefoot’s renowned resolution and translation at a more affordable price. This expertly designed 3-way speaker includes a 1-inch radiator tweeter, two 2.5-inch aluminum-cone midrange drivers, and an 8-inch aluminum-cone subwoofer, offering an impressive 40Hz–45kHz frequency response. This 610-watt studio monitor utilizes amplifier stages for maximum sonic transparency, while Barefoot Sound’s state-of-the-art MEME™ technology provides four voice models, allowing you to reference different types of speakers directly from the MicroMain45. Ideal for small and mid-sized project studios, the Barefoot Sound MicroMain45 delivers the high-level performance of the MicroMain27 and MicroMain26 in a value-packed nearfield monitor.
MEME™ TECHNOLOGY
Like all Barefoot Sound monitors, the MicroMain45 incorporates versatile MEME™ Technology (Multi-Emphasis Monitor Emulation). Although high-resolution monitors have their advantages, many engineers still use NS10Ms and Mix Cubes for secondary references due to their familiarity and usefulness for focusing on specific aspects of a mix. However, adding extra speakers can degrade the primary reference monitors’ sound field, and these older models require additional amplifiers, cables, and studio space. The solution is the MicroMain45’s ability to emulate those classic speakers. With a simple turn of a knob, users can switch from the MicroMain45’s highly revealing “Flat” response to the warmer “Hi-Fi” setting, which emulates high-end consumer audio gear. The “Old School” setting closely mimics the NS10M nearfield sound, while the “Cube” setting replicates the mid-centric sound of classic mix cubes. Rather than replicating every subtle quirk of these vintage speakers, the MicroMain45 captures their essence, modeling their frequency, phase, transient responses, dynamic compression, and specific distortion components.
MICROMAIN45 EXPLAINED
TECH SPECS
MicroMain45 Owner’s Manual – PDF
Description: | 3-way active monitor with MEME™ Technology |
Controls: | Input level stepped attenuator, Equalization contour |
Input Impedance: | 50k Ohm |
Frequency Response: | 40Hz – 45kHz (±3dB), 53Hz – 40kHz (±1dB) |
Bass Response: | -3 dB @ 35Hz, Q = 0.707 Slope = 12 dB/octave |
MAX SPL: | Continuous 113dB |
Cabinet: | 14 liters total internal volume, Sealed woofer and midrange enclosures, Machined aluminum baffle plate, Long fiber wool acoustic damping throughout |
Crossover Frequencies: | 600 / 3600 Hz |
Tweeter: | 1″ ring radiator, Advanced geometry motor, Rear waveguide chamber Amplifier: 180 watts |
Midranges: |
2 x 2.5″ aluminum cones, Advanced geometry motor, +/- 2 mm linear excursion
Amplifier: 180 watts
|
Subwoofers: |
8″ aluminum cone with high linearity motor, +/- 13 mm linear excursion
Amplifier: 250 watts
|
AC Power Input: | Nominal 115 VAC or 230 VAC selectable |
Power Consumption: | Idle: 18W, Maximum: 400W |
Weight: | Speaker: 37.5 lbs each (17 kg) Shipping: 47 lbs each (21 kg) |
Dimensions HxWxD: | Cabinet: 11.0 x 15.5 x 10.75 inches (279 x 394 x 273 mm) Overall: 11.0 x 15.5 x 11.0 inches (279 x 394 x 279 mm) |
Singapore Authorised Dealer Since 2021, Element5
Element5 has been the authorised distributor of Barefoot Sound since 2021 in Singapore. With deep experience in studio monitor & HIFI, we deliver expert recommendations. Also exhibit barefoot sound speakers every year in Singapore HIFI show.
Visit our 3,500 sq ft AV showroom at 38 Jalan Pemimpin, #03-03, Singapore to experience our demo of barefoot sound speakers like ft01, ft03, and mm26
Buy authentic. Buy from Element5.
✔ Singapore Official Authorized Distributor
Element5 provides guaranteed authenticity for every unit we sell.
✔ Professional Consultation & Setup
Get tailored recommendations based on your room size, lighting conditions, and preferences. Our AV experts are here to help you create the perfect setup.
✔ Trustable Supports
We’re with you - before and long after your purchase - backed by accredited supports from manufacturers we represent. Every day, our audio & projectors light up at thousands of homes in Singapore, with our trustable supports over years!